Black Eagle Renegade Fletched Arrows

Black Eagle Renegade Fletched Arrows

Regular price $155.99
Shipping calculated at checkout.

Black Eagle Renegade Feather Fletched Arrows

**We will cut and insert these arrows at no charge. Please let us know length, feather shape (shield/parabolic), feather colors, and any other insturctions in the comment box when you add to cart.

*Fletched arrow orders are custom built at the time an order is placed.  Please allow for approximately 3-5 days for the arrows to be built.

The Renegade was designed specially for hunters that want a supremely accurate small diameter carbon arrow that is tough as nails - at a great price. This shaft was designed to eliminate cross-wind drift. It’s perfect for those long range shots. The flight characteristics of this extremely durable shaft ensures maximum power down-range.

FEATURES

  • .005" Straightness or Straighter
  • ± 2 Grain Weight Tolerance
  • 32.5" Shaft Length
  • .204" Inside Diameter

ARROWS INCLUDE:

  • Black Eagle Arrows "R" Nock 10 -Orange- Grains
  • Stainless Steel Bone Crushing Half-Outs - 52 Grains

Specifications:

  • 250 - .280" OD - 10.8 GPI
  • 300 - .275" OD - 10 GPI
  • 350 - .267" OD - 8.7 GPI
  • 400 - .263" OD - 8 GPI

To install the Half-Out.

  1. Square the end of the arrow shaft
  2. Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
  3. If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with field point installed until the spin is true.
  4. Again, Rotate Half-Out until it spins perfect.
  5. Use a Silver or Black Sharpie and mark the Shaft and the Half-Out for perfect alignment once glue is applied.
  6. Black Eagle has tested Super glue, insert/outsert glue and epoxy and all of them work great.
  7. Apply a even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
  8. Once the glued half-out is finished stand the arrow on the point to dry.